Stirling engine? |
Did you mean | Travel | Economics | Finance | Marketing | Business | Culture | Geography | History | Life | Mathematics | Science | Society | Technology | New site added |
| Add a link on the top of this Stirling engine page Express submission by secure payment ! |
A Stirling engine and generator set with 55 kW electrical output, for combined heat and power applications. Click image for detailed description.The Stirling engine, also known as the hot air engine, is a heat engine of the external combustion piston engine type. Its invention is cred to the Scottish clergyman Rev. Robert Stirling in 1816 who made significant improvements to earlier designs and took out the first patent. He was later assisted in its development by his engineer brother James Stirling.
Have to see |
Contents |
|
General description
The inventors sought to create a safer alternative to the steam engines of the time, whose boilers often exploded due to the high pressure of the steam and the inadequate materials. Stirling engines will convert any temperature difference directly into movement.
The Stirling engine works by the repeated heating and cooling of a sealed amount of working gas, usually air or other gases such as hydrogen or helium. The gas follows the behaviour described by the gas laws which describe how a gas' pressure, temperature and volume are related. When the gas is heated, because it is in a sealed chamber, the pressure rises and this then acts on the power piston to produce a power stroke. When the gas is cooled the pressure drops and this means that less work needs to be done by the piston to recompress the gas on the return stroke, giving a net gain in power available on the shaft. The working gas flows cyclically between the hot and cold heat exchangers.
The working gas is sealed within the piston cylinders, so there is no exhaust gas, (other than that incidental to heat production if combustion is used as the heat source). No valves are required, unlike other types of piston engines.
Engine
Some Stirling engines use a separate displacer piston to move the working gas back and forth between cold and hot reservoirs. Others rely on interconnecting the power pistons of multiple cylinders to move the working gas, with the cylinders held at different temperatures.
In true Stirling engines a regenerator, typically a mass of wire, is located between the reservoirs. As the gas cycles between the hot and cold sides, its heat is transferred to and from the regenerator. In some designs, the displacer piston is itself the regenerator. This regenerator contributes to the efficiency of the Stirling cycle.
The ideal Stirling engine cycle has the same theoretical efficiency as a Carnot heat engine for the same input and output temperatures. The thermodynamic efficiency is higher than steam engines (or even some modern internal combustion and Diesel engines).
Stirling cryocoolers
Stirling engines will also work in reverse: when applying motion to the shaft, a temperature difference appears between the reservoirs. One of their modern uses is in refrigeration and cryogenics. The first Stirling-cycle cryocooler was developed at Philips in the 1950s and commercialized in e.g. liquid nitrogen production plants. The Philips Cryogenics business evolved until it was privatized in 1990 to Stirling Cryogenics & Refrigeration BV, Stirling The Netherlands. This company is still active in the development and manufacturing Stirling cryocoolers and cryogenic cooling systems.
Nowadays also a wide variety of smaller size Stirling cryocoolers are commercially available in the market for e.g. the cooling of sensors.
Configurations
Engineers classify Stirling engines into three distinct types:
- An alpha Stirling contains two separate power pistons in separate cylinders, one "hot" piston and one "cold" piston. The hot piston cylinder is situated inside the higher temperature heat exchanger and the cold piston cylinder is situated inside the low temperature heat exchanger. This type of engine has a very high power-to-volume ratio but has technical problems due to the usually high temperature of the "hot" piston and its seals. (See animation here 1)
- A beta Stirling has a single power piston arranged within the same cylinder on the same shaft as a displacer piston. The displacer piston is a loose fit and does not extract any power from the expanding gas but only serves to shuttle the working gas from the hot heat exchanger to the cold heat exchanger. When the working gas is pushed to the hot end of the cylinder it expands and pushes the power piston. When it is pushed to the cold end of the cylinder it contracts and the momentum of the machine, usually enhanced by a flywheel pushes the power piston the other way to recompress the gas. This engine does not require moving seals in the hot portion of the engine and so can achieve higher compression ratios. (See animation here 2)
- A gamma Stirling is simply a beta Stirling in which the power piston is mounted in a separate cylinder alongside the displacer piston cylinder, but is still connected to the same shaft. The gas in the two cylinders can flow freely between them and remains a single body. This configuration produces a lower compression ratio but is mechanically simpler and often used in multi-cylinder Stirling engines. (See animation here 3)
Changes to the configuration of mechanical Stirling engine continues to interest engineers and inventors alike. Notably, some are in hot pursuit of the rotary Stirling engine. The goal is to convert power from the Stirling cycle directly into torque. A similar goal to that of the design rotary combustion engine.
There is also a field of "Free piston" stirling cycles engines, including those with liquid pistons and those with diaphrams as pistons. See the book "Free Piston Stirling Cycle Engines" by G. Walker
An alternative to the mechanical Stirling engine is the fluidyne, which uses the Stirling cycle via a hydraulic piston. In its most basic form it contains a working gas, a liquid and two check valves for moving parts.
Heat sources
Any temperature difference will power a Stirling engine and the term "external combustion engine" often applied to it is misleading. A heat source may be the result of combustion but can also be solar, geothermal , or nuclear. Likewise a "cold source" below the ambient temperature can be used as the temperature difference. A cold source may be the result of a cryogenic fluid or iced water. Since small differential temperatures require large mass flows, parasitic losses in pumping the heating or cooling fluids rise and tend to reduce the efficiency of the cycle.
Because a heat exchanger separates the working gas from the heat source, a wide range of combustion fuels can be used, or the engine can be adapted to run on waste heat from some other process. Since the combustion products do not contact the internal moving parts of the engine, a Stirling engine can run on landfill gas containing siloxanes without the accumulation of silica that damages internal combustion engines running on this fuel. The life of lubricating oil is longer than for internal-combustion engines.
Strengths of Stirling engines
- The heat is external and the burning of a fuel-air mixture can be more accurately controlled.
- A continuous combustion process can be used to supply heat, so emission of unburned fuel can be greatly reduced.
- Most types of Stirling engines have the bearing and seals on the cool side; consequently, they require less lubricant and last significantly longer between overhauls than other reciprocating engine types.
- The engine as a whole is much less complex than other reciprocating engine types. No valves are needed. Fuel and intake systems are very simple.
- They operate at relatively low pressure and won't blow up like steam engines.
- Low operating pressure means less robust cylinders and less weight.
- They can be built to run very quietly and without air, for use in submarines.
- They hold promise as aircraft engines. They are silent, less polluting, gain efficiency with altitude (piston engines lose efficiency), are more reliable due to fewer parts and the absence of an ignition system, produce much less vibration (airframes last longer) and safer, less explosive fuels may be used.
Problems with Stirling engines
- Stirling engines require both input and output heat exchangers which must contain the pressure of the working fluid, and which must resist any corrosive effects due to the heat source. These increase the cost of the engine especially when they are designed to the high level of "effectiveness" (heat exchanger efficiency) needed for optimizing fuel economy.
- Stirling engines, especially the type that run on small temperature differentials, are quite large for the amount of power that they produce, due to the heat exchangers.
- Dissipation of waste heat is especially complicated because the coolant temperature is kept as low as possible to maximize thermal efficiency. This drives up the size of the radiators markedly which can make packaging difficult. This has been one of the factors limiting the adoption of Stirling engines as automotive prime movers. (Conversely however it is convenient for domestic or business heating systems where combined heat and power (CHP) systems show promise.)
- A "pure" Stirling engine cannot start instantly; it literally needs to "warm up". This is also the case for internal combustion engines, but the warm up time may be shorter than for Stirlings.
- Power output of a Stirling is constant and hard to change rapidly from one level to another. Typically this is done by varying the displacement of the engine (often through use of a swashplate crankshaft arrangement) or by changing the mass of entrained working fluid (generally helium or hydrogen).
- Hydrogen's lowest molecular weight makes it the best working fluid to use in a Stirling engine, but as a tiny molecule, it is very hard to keep it inside the engine and auxiliary systems need to be typically added to maintain the proper quantity of working fluid. These systems can be as simple as a gas storage bottle or more complicated such as a gas generator. In any event, they add weight, increase cost, and introduce some undesirable complications.
History and development
Devices called air engines have been recorded from as early as 1699 around the time when the laws of gasses were first set out. The English inventor Sir George Caley is known to have devised air engines c. 1807. Robert Stirling's innovative contribution of 1816 was what he called the 'Economiser' now known as the regenerator which acts to retain heat in the hot portion of the engine as the air passes to the cold part and thus improve the efficiency.
During the nineteenth century the Stirling engine found applications anywhere a source of low to medium power was required , a role that was eventually usurped by the electric motor at the century's end.
It was also employed in reverse as a heat pump to produce early refrigeration.
In the late 1940s the Philips Electronics company in The Netherlands were searching for a versatile electricity generator to enable worldwide expansion of sales of its electronic devices in areas with no reliable electricity infrastructure. The company put a huge R&D research effort into Stirling engines building on research it had started in the 1930s and which lasted until the 1970s. The only lasting commercial spin-off from this for Philips was its reversed Stirling engine: the Stirling cryocooler.
Kockums4, the Swedish shipbuilder, had built at least 10 commercially successful Stirling powered submarines during the '80s. They are almost as undetectable as a nuclear submarine, but lack the endurance since they need oxygen to burn fuel. As of 2005 they have started to bring compressed oxygen with them. (No endurance stated.)
On August 11, 2005, Southern California Edison announced an agreement to purchase solar powered Stirling engines from Stirling Energy Systems5 over a twenty year period and in quantity (20,000 units) sufficient to generate 500 megawatts of electricity. These systems - to be installed on a 4,500 acre (19 km²) solar farm - will use mirrors to direct and concentrate sunlight onto the engines which will in turn drive generators.
External links
How it works
- How Stuff Works: Stirling-engine A good description with animated diagrams.
- How it works by Amitabha Mukerjee
- Animations:
History
Academic and technical studies
- David Haywood University of Canterbury NZ: "Introduction to Stirling-Cycle Analysis" (PDF)
- Stirling-Cycle Research Group, University of Canterbury NZ
- University of Ohio
- Israel Urieli: Stirling Engine Simple Analysis,
- Peter Fette: Stirling Engine Researcher, mirror
- Argument on why the Stirling engine can be applied in aviation, mirror
Societies and conferences
- The Stirling Engine Society
- Stirling News - newsletter published quarterly in the UK by The Stirling Engine Society
- Programme of the 10th Stirling Engine Conference 2001
Hobbyists and enthusiasts
- Webring for Sterling engine Hobbyists
- Simple Do-It-Yourself Stirling engine This only requires a temperature difference of 8°C to run. A hot hand and/or an ice cube is enough to keep it running.
- Japanese hobbyist's Stirling engine home page
- How to build a Stirling engine from a test-tube
- Melbourne Society of Model & Experimental Engineers Journal A novel Stirling cycle hot air engine to build
- Will Rausch - Stirling engine enthusiast Many links
- Robert Sier - Stirling engine enthusiast Many links
- Rotary Stirling Engines enthusiast website
Professional manufacturers
- Whispertech home-scale generators, Micro Combined Heat and Power MCHP
- American Stirling Company - Power Producing Engines
- Stirling Technology, Inc. Energy recovery ventilator technology
- Stirling Cryogenics & Refrigeration BV,
- STM Power Combined heat and power Stirling engine-generator sets
- QRMC Sterling engine manufacturer
- Thales Cryogenics
Directories & indexes
- Stirling Engines page on the Open Directory Project.
- Stirling Engine Directory - List of resources including "how it works", demo units, kits, applications, project sites. (From FreeEnergyNews.com)